Listed below are current job openings: However, often times our positions are filled before we have the time to create an ad or job posting. We highly recommend that you register and remain active with us to be considered for ALL of our open jobs.  
If you’re interested in applying, please contact our office at 585-360-4670 or send your resume to Jdalykas@canalsidejobs.com for immediate consideration.


Production Line Workers 

We are looking for production line workers to fill immediate openings for a local food manufacturer here in Rochester New York.

Temp to Hire and Temporary positions available

Hours – Monday – Friday 6:30am, 7:45am until 5:00-6:00 pm (Hours will vary based on the daily workload)

Salary – $11.80 per hour

Qualifications:

•Previous experience in production, manufacturing is preferred but not required
•Familiarity with manufacturing machinery and equipment ( A plus )
•Ability to handle physical workload ( reaching, bending, standing, stooping )
•Must be able to stand for entire shift 8-12 hours per day

Responsibilities:

•Operate, maintain and clean manufacturing machinery, product, and equipment
•Complete work orders and requests in a timely fashion
•Perform routine and repetitive tasks
•Adhere to safety policies and procedures

Please respond with an updated resume to Jdalykas@canalsidejobs.com or call 585-360-4670 for more information.


Dishwashers

Must have reliable transportation, as this is located in Victor – Not on bus line.

Hours: A & B Shift available Wed – Sat – 9am-3pm and 3pm-10-11pm ( 11 the latest )

Wage: $12.50 per hour

Temp to Hire position

Responsibilities:

•Sort and rinse dirty dishes, glass, tableware and other cooking utensils and place them in racks to send through dish machine.
•Wash pots, pans and trays by hand.
•Remove trash and garbage to dumpster and ensure dumpster lids are closed at all times.
•Sweep / mop floors.
•Conduct general restaurant and restroom cleaning as directed.
•Other duties as directed.

Physical Demands:
The employee must frequently lift and/or move objects up to 10 pounds and occasionally lift and/or move objects up to 25 pounds.

Other Requirements:

•Must have reliable transportation – not on a bus line
•Must be dedicated, positive attitude and want to grow in position
•Must be able to handle tough environment
•Must be flexible with hours

Please respond with an updated resume to Jdalykas@canalsidejobs.com or call 585-360-4670 for more information.


CNC Mill Programmer/ Set Up

Temp to Hire position

Hours – 7am-3:30pm (flexible) with Overtime available

Salary – $25-$30/hr

REQUIREMENTS:

  • Must have Mastercam experience
  • Must be familiar with Haas and Fanuc controls
  • Must be able to read blueprints
  • Must have a high level of mechanical aptitude and be able to work well independently

JOB DUTIES:

  • Responsible for programming, setting up and running parts
  • Read and interpret blueprints or sketches per specs
  • Perform inspections and make sure parts are in tolerance
  • Perform established routine maintenance on machines as scheduled or needed
  • Maintain a clean and safe work area

Please respond with a current resume detailing your experience to Jdalykas@canalsidejobs.com or call 585-360-4670 for more information.


Welder / Metal Fabricator

We are looking to fill a full time Temp to Hire position for a Welder/Metal Fabricator

Requirements:

  • Must be proficient in MIG and TIG
  • Ability to read and interpret blueprints
  • Must have good math skills; Shop Math
  • Heavy lifting up to 75lbs
  • Must be mechanically inclined
  • Must have basic tools & equipment
  • Must have valid NYS driver license
  • Must be work overtime and ability to travel 1-2 weeks at a time

Please respond with an updated resume to Jdalykas@canalsidejobs.com or call 585-360-4670 for more information.


Warehouse Associates / Order Pullers

We are looking to fill immediate openings for Warehouse Associates. These positions require the ability to assemble units according to specifications and perform assembly control plans and procedures. Responsible to perform duties in the areas of production, shipping/receiving, warehousing and inspection.

ESSENTIAL RESPONSIBILITIES:

  • Determine quantity of units required for an order and take inventory of product
  • Resolve quantity discrepancies with crib attendant prior to initiating assembly process
  • Assemble units and perform visual check on all parts of all units
  • Test units for proper operation
  • Make necessary corrections or substitution of parts to eliminate defects and reassemble
  • Transport component parts to and from stockroom

May be required to perform additional or alternate duties under the direction of the supervisor as needed

QUALIFICATIONS:

  • Must be physically able to lift products, bend and twist, stand on concrete floor for duration of shift
  • Must have forklift experience
  • Must have reliable transportation
  • Good aptitude and manual dexterity
  • Ability to work with others as a team player and independently

Please respond with an updated resume to Jdalykas@canalsidejobs.com or call 585-360-4670 for more information.


Quality Control Technician 

Temp to Hire – A shift

Pay rate: Based on experience

Responsibilities:

  • Compile and evaluate statistical data collected from the testing and inspection of parts at various stages of the production process to maintain the quality and reliability
  • Check incoming materials against quality standards as specified in purchase orders in coordination with department leaders and other purchasing agents
  • Test and analyze the quality of parts during and after processing against known quality standards
  • Internal audits, Assembly, Deburr, Hand-verify quality of product
  • All other job duties as assigned

Qualifications:

  • High School diploma or GED
  • 3-5 years experience in quality control and a minimum of 5 years experience
  • Be able to read and interpret blueprints
  • Solid computer, organizational and problem-solving skills.
  • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible
  • Ability to operate machines and use tools such as coordinate measuring machine (CMM)
  • Ability to lift/carry/push/pull up to 50lbs; frequent handling and reaching; occasional crouching/stooping; repetitive motion standing/walking
  • Strong root-cause analysis skills

Please respond with an updated resume to Jdalykas@canalsidejobs.com or call 585-360-4670 for more information.


Tool Makers/Grinders

Temp to Hire

Salary – Based on skill & experience

Minimum Requirements :

  • Must have 5-10+ years  experience
  • Must have the ability to grind specialty tools, step reamers, step drills, form tools
  • Manual mill and lathes and or proto trak experience as well
  • CNC Grinding, CNC Programming, and EDM experience a plus
  • Great communication skills/teamwork required
  • Self-starter, energetic, resourceful and professional

Please respond with an updated resume to Jdalykas@canalsidejobs.com or call 585-360-4670 for more information.


Flexo Press Operators 

Candidates must have reliable transportation and have experience working in manufacturing (printing industry)

Temp to Hire

Salary – Based on skill & experience

JOB RESPONSIBILITIES

  • Set up, operate, and maintain a Flexographic Press 10″ Narrow Web / Mark Andy & Nilpeter 6 to 10 Color
  • Perform routine preventative maintenance on equipment and necessary cleaning is required
  • Monitor performance of press and quality of printed product
  • Keep work area clean and organized in order to ensure the safety of employees
  • Additional duties as required

QUALIFICATIONS & EXPERIENCE

  • Flexographic printing experience a plus
  • Strong mechanical aptitude and ability to perform basic math functions
  • Must be able to distinguish between different colors and shades of the same color
  • Analytical thinking/learning skills
  • Excellent verbal and written communication
  • Dependable and dedicated
  • Commitment to task

Please respond with an updated resume to Jdalykas@canalsidejobs.com or call 585-360-4670 for more information.



 

Other positions we are hiring for:

Office/Clerical

Warehouse/Forklift Drivers

Industrial Cleaning/Sanitation

Production Supervisors/Managers

If you’re interested in applying, please contact our office at 585-360-4670 or send your resume to Jdalykas@canalsidejobs.com for immediate consideration.